multiple-components

{GLMMcosinor} allows specification of multi-component cosinor models. This is useful if there are multiple explanatory variables with known periods affecting the response variable.

Generating a two-component model

To generate a multi-component model, set n_components in the amp_acro() part of the formula to the desired number of components. Then, optionally assign groups to each component in the group argument. If only one group entry is supplied but n_components is greater than 1, then the single group entry will be matched to each component.

The period argument must also match the length of n_components, where the order of the periods corresponds to their assigned component. For example, if n_components = 2, and period = c(12,6), then the first component has a period of 12 and the second a period of 6. Similarly to the group argument, if only one period is supplied despite n_components being greater than 1, then this period will be matched to each component.

For example:

library(GLMMcosinor)
testdata_two_components <- simulate_cosinor(
  1000,
  n_period = 10,
  mesor = 7,
  amp = c(0.1, 0.4),
  acro = c(1, 1.5),
  beta.mesor = 4.4,
  beta.amp = c(2, 1),
  beta.acro = c(1, -1.5),
  family = "poisson",
  period = c(12, 6),
  n_components = 2,
  beta.group = TRUE
)

object <- cglmm(
  Y ~ group + amp_acro(
    time_col = times,
    n_components = 2,
    period = c(12, 6),
    group = c("group", "group")
  ),
  data = testdata_two_components,
  family = poisson()
)
object
#> 
#>  Conditional Model 
#> 
#>  Raw formula: 
#> Y ~ group + group:main_rrr1 + group:main_sss1 + group:main_rrr2 +      group:main_sss2 
#> 
#>  Raw Coefficients: 
#>                  Estimate
#> (Intercept)       6.99894
#> group1           -2.60342
#> group0:main_rrr1  0.05248
#> group1:main_rrr1  1.08250
#> group0:main_sss1  0.08753
#> group1:main_sss1  1.68129
#> group0:main_rrr2  0.02926
#> group1:main_rrr2  0.06860
#> group0:main_sss2  0.40068
#> group1:main_sss2 -0.99822
#> 
#>  Transformed Coefficients: 
#>                Estimate
#> (Intercept)     6.99894
#> [group=1]      -2.60342
#> [group=0]:amp1  0.10205
#> [group=1]:amp1  1.99964
#> [group=0]:amp2  0.40175
#> [group=1]:amp2  1.00057
#> [group=0]:acr1  1.03069
#> [group=1]:acr1  0.99875
#> [group=0]:acr2  1.49790
#> [group=1]:acr2 -1.50218

In the output, the suffix on the estimates for amplitude and acrophase represents its component:

[group=0]:amp1 = 0.10205represents the estimate for amplitude of group 0 for the first component
[group=1]:amp1 = 1.99964represents the estimate for amplitude of group 1 for the first component
[group=0]:amp2 = 0.40175represnts the estimate for amplitude of group 0 for the second component
[group=1]:amp2 = 1.00057represnts the estimate for amplitude of group 1 for the second component
Similarly for acrophase estimates

autoplot(object)

If a multicomponent model has one component that is grouped with other components that aren’t, the vector input for group must still be the same length as n_components but have the non-grouped components represented as group = NA.

For example, if wanted only the first component to have a grouped component, we would specify the group argument as group = c("group", NA)) . Here, the first component is grouped by group, and the second component is not grouped. The data was simulated such that the second component was the same for both groups.

testdata_two_components_grouped <- simulate_cosinor(
  1000,
  n_period = 5,
  mesor = 3.7,
  amp = c(0.1, 0.4),
  acro = c(1, 1.5),
  beta.mesor = 4,
  beta.amp = c(2, 0.4),
  beta.acro = c(1, 1.5),
  family = "poisson",
  period = c(12, 6),
  n_components = 2,
  beta.group = TRUE
)

object <- cglmm(
  Y ~ group + amp_acro(
    time_col = times,
    n_components = 2,
    period = c(12, 6),
    group = c("group", NA)
  ),
  data = testdata_two_components_grouped,
  family = poisson()
)
object
#> 
#>  Conditional Model 
#> 
#>  Raw formula: 
#> Y ~ group + main_rrr2 + main_sss2 + group:main_rrr1 + group:main_sss1 
#> 
#>  Raw Coefficients: 
#>                  Estimate
#> (Intercept)       3.69558
#> group1            0.31184
#> main_rrr2         0.02612
#> main_sss2         0.39710
#> group0:main_rrr1  0.04946
#> group1:main_rrr1  1.07681
#> group0:main_sss1  0.09546
#> group1:main_sss1  1.67644
#> 
#>  Transformed Coefficients: 
#>                Estimate
#> (Intercept)     3.69558
#> [group=1]       0.31184
#> [group=0]:amp1  0.10752
#> [group=1]:amp1  1.99248
#> amp2            0.39795
#> [group=0]:acr1  1.09273
#> [group=1]:acr1  0.99984
#> acr2            1.50512

We would interpret the output the transformed coefficients as follows:

MESOR for group 0 is 3.69558.
MESOR difference to group 0 for group 1 is [group=1] = 0.31184
The estimate for the amplitude of the first component for group 0 is[group=0]:amp1 = 0.10752
The estimate for the amplitude of the first component for group 1 is [group=1]:amp1 = 1.99248
The estimate for the amplitude of the second component is amp2 = 0.39795and the same for both group 0 and group 1
The estimate for the acrophase of the first component for group 0 is [group=0]:acr1 = 1.09273radians
The estimate for the acrophase of the first component for group 1 is [group=1]:acr1 = 0.99984radians
The estimate for the acrophase of the second component is acr2 = 1.50512radians and is the same for both group 0 and group 1

autoplot(object, superimpose.data = TRUE)

In this example, it is not strictly necessary to specify group = c("group", NA)) since specifying group = c("group","group")still yields accurate estimates:

object <- cglmm(
  Y ~ group + amp_acro(
    time_col = times,
    n_components = 2,
    period = c(12, 6),
    group = c("group", "group")
  ),
  data = testdata_two_components_grouped,
  family = poisson()
)
object
#> 
#>  Conditional Model 
#> 
#>  Raw formula: 
#> Y ~ group + group:main_rrr1 + group:main_sss1 + group:main_rrr2 +      group:main_sss2 
#> 
#>  Raw Coefficients: 
#>                  Estimate
#> (Intercept)       3.69549
#> group1            0.31048
#> group0:main_rrr1  0.05027
#> group1:main_rrr1  1.07082
#> group0:main_sss1  0.09515
#> group1:main_sss1  1.68461
#> group0:main_rrr2  0.01368
#> group1:main_rrr2  0.03613
#> group0:main_sss2  0.39617
#> group1:main_sss2  0.39776
#> 
#>  Transformed Coefficients: 
#>                Estimate
#> (Intercept)     3.69549
#> [group=1]       0.31048
#> [group=0]:amp1  0.10761
#> [group=1]:amp1  1.99614
#> [group=0]:amp2  0.39641
#> [group=1]:amp2  0.39939
#> [group=0]:acr1  1.08472
#> [group=1]:acr1  1.00457
#> [group=0]:acr2  1.53629
#> [group=1]:acr2  1.48022

If a multicomponent model is specified (n_components > 1) but the length of group or period is 1, then it will be assumed that the one group and/or period values specified apply to all components. For example, if n_components = 2 , but group = "group", then the one element in this group vector will be replicated to produce group = c("group","group")which now has a length that matches n_components. The same applies for period.

For instance, the following two cglmm() calls fit the same models:

cglmm(
  Y ~ group + amp_acro(times,
    n_components = 2,
    period = 12,
    group = "group"
  ),
  data = testdata_two_components,
  family = poisson()
)
#> 
#>  Conditional Model 
#> 
#>  Raw formula: 
#> Y ~ group + group:main_rrr1 + group:main_sss1 + group:main_rrr2 +      group:main_sss2 
#> 
#>  Raw Coefficients: 
#>                  Estimate
#> (Intercept)       7.04448
#> group1           -2.22027
#> group0:main_rrr1  0.07222
#> group1:main_rrr1  0.39492
#> group0:main_sss1  0.11292
#> group1:main_sss1  1.11176
#> group0:main_rrr2       NA
#> group1:main_rrr2       NA
#> group0:main_sss2       NA
#> group1:main_sss2       NA
#> 
#>  Transformed Coefficients: 
#>                Estimate
#> (Intercept)     7.04448
#> [group=1]      -2.22027
#> [group=0]:amp1  0.13404
#> [group=1]:amp1  1.17982
#> [group=0]:amp2       NA
#> [group=1]:amp2       NA
#> [group=0]:acr1  1.00181
#> [group=1]:acr1  1.22947
#> [group=0]:acr2       NA
#> [group=1]:acr2       NA


cglmm(
  Y ~ group + amp_acro(times,
    n_components = 2,
    period = c(12, 12),
    group = c("group", "group")
  ),
  data = testdata_two_components,
  family = poisson()
)
#> 
#>  Conditional Model 
#> 
#>  Raw formula: 
#> Y ~ group + group:main_rrr1 + group:main_sss1 + group:main_rrr2 +      group:main_sss2 
#> 
#>  Raw Coefficients: 
#>                  Estimate
#> (Intercept)       7.04448
#> group1           -2.22027
#> group0:main_rrr1  0.07222
#> group1:main_rrr1  0.39492
#> group0:main_sss1  0.11292
#> group1:main_sss1  1.11176
#> group0:main_rrr2       NA
#> group1:main_rrr2       NA
#> group0:main_sss2       NA
#> group1:main_sss2       NA
#> 
#>  Transformed Coefficients: 
#>                Estimate
#> (Intercept)     7.04448
#> [group=1]      -2.22027
#> [group=0]:amp1  0.13404
#> [group=1]:amp1  1.17982
#> [group=0]:amp2       NA
#> [group=1]:amp2       NA
#> [group=0]:acr1  1.00181
#> [group=1]:acr1  1.22947
#> [group=0]:acr2       NA
#> [group=1]:acr2       NA

multiple-components

Oliver Jayasinghe and Rex Parsons

Generating a two-component model

Generating a three-component model

Generating models with n-components